
Brea, CA: Chimney Work From the Roof and the Firebox
Ask Us to Look at Your Brea Chimney
Send your name, number and street. One of us calls back to set a Brea day for the roof and the firebox.
Brea ZIP Codes on Our Route
We book Brea on the same days as La Habra Heights and Chino Hills. Give us your street and we will say which day fits.
What We Do in Brea
Brea work covers cap fastening, chase covers, metal flue inspection and crown repair on older brick. Cards below lead to the Brea page for that job.
Chimney Sweep in Brea
Creosote and soot out of the flue, with one brother on the roof checking the cap while the other works the firebox.
Learn MoreChimney Inspection in Brea
Level 1, 2 or 3 to NFPA 211, with photos from the roof and the firebox in one written report.
Learn MoreChimney Repair in Brea
Crown, mortar, liner and crack repair. On the coast we look at salt damage first, in the canyons at quake cracks.
Learn MoreFireplace Inspection in Brea
Firebox, refractory panels, damper and smoke chamber, checked before the first fire of the season.
Learn MoreFireplace Repair in Brea
Refractory, damper and hearth repairs, done in the order the inspection found them.
Learn MoreChimney Level 2 Inspection in Brea
The camera inspection for a sale, or after a quake or a fire season. We send the report to you and your agent.
Learn MoreChimney Cap Installation in Brea
Stainless or copper caps with spark arrestor mesh, sized on the roof. The part salt air and embers test first.
Learn MoreChimney Flashing Repair in Brea
Step and counter flashing where the chimney meets the roof, sealed before the winter rain.
Learn MoreChimney Masonry Repair in Brea
Tuckpointing and brick work on stacks that face the ocean or sit on a canyon slope.
Learn MoreChimney Rebuilds in Brea
Partial or full rebuilds when repairs will not hold, from the roofline up or from the firebox.
Learn MoreFireplace Cleaning in Brea
Firebox, glass doors and hearth cleaned out, for wood, gas and electric units.
Learn MoreGas Fireplace Cleaning in Brea
Burner, pilot, logs and glass serviced once a year. Beach air coats a gas unit faster than people think.
Learn MoreGas Fireplace Repair in Brea
Pilot, thermocouple, valve and ignition faults traced on site and fixed.
Learn MoreFireplace Remodel in Brea
New surrounds, mantels and insert conversions, after we check the firebox and flue underneath.
Learn MoreFireplace Inserts in Brea
Gas, wood or electric inserts fitted to the firebox, with the liner and venting sized for it.
Learn MorePellet Stove Repair in Brea
Auger, igniter, blower and control board work for stoves in the canyons and up the coast.
Learn MoreWood Stove Repair in Brea
Baffles, firebrick, gaskets and combustors for the canyon homes that heat with wood.
Learn MoreGas Logs in Brea
Vented or ventless log sets sized to the room, with the gas line and a damper clamp.
Learn MoreWhat the two of us look for in Brea
Brea means tar, from the oil seeps that started this 1917 town, but its houses came mostly after the 1950s. Condos are mixed in among the detached homes, and metal fireplaces are common, so we often start with a chase cover here. Santa Anas pull at loose caps and carry embers. Two quakes, one in 2008 close by and one in 2014, shook this city, so a flue or metal joint can quietly separate up there without anyone noticing.
On the Roof
The chase cover or crown gets looked at along with the cap, because wind off the hills is hard on anything loose.
At the Firebox
Inside a metal unit, section joints can pull apart with shaking, so the camera checks each one at a time.
When to Call
Before fall winds, and after any quake that gets your attention.
The Houses
In Brea: condos, later tract houses and detached homes, often with factory-built metal fireplaces.
Brea Visits
Get both ends of your Brea chimney checked
One call sets the day. One of us takes the roof, the other takes the firebox, and the report with photos from both comes with the visit.
